Stone production line is suitable for crushing mountain stone, limestone, granite, river pebble and other non-metallic ores to the required size. It is widely used in water conservancy, railway, highway and other infrastructure construction. Stone production line is mainly composed of vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, collector, medium electronic control equipment composition, design output is generally 50-800T/H, in order to meet different processing needs of customers, it can be equipped with cone crusher, dust removal equipment.
Introduction to process flow of stone production line：
Bulk stone is crushed by vibrating feeder uniformly into jaw crusher. The crushed stone is further crushed by belt conveyor to impact crusher. The crushed stone is sent to vibrating screen by belt conveyor for screening. Several kinds of stones with different specifications are screened out to meet the requirements of granules. The finished product is conveyed to the finished product stacker by the belt conveyor, and the stone which does not meet the particle requirements is sent back by the belt conveyor to the impact crusher for further crushing, forming a closed-circuit multiple cycles. The finished product granularity can be combined and graded according to the user's needs, and auxiliary dust removal equipment can be configured to protect the environment. Vanguard Machinery is the most professional stone production line manufacturer, can be tailored for customers to meet different needs of production line equipment. At present, we provide products and technical support for thousands of users in China. Welcome to visit and purchase equipment.
With the development of mining resources, a large number of stone factories have been established. At present, the main mining mines are limestone, basalt, granite, river pebble, cobblestone and so on. These ores are widely used in construction, concrete mixing station, sand and stone quarry and many other industries after processing or are invested in processing plant. Before these equipment, we need to invest resources in stone factories first. To set up a stone factory, first of all, the relevant certificates must be handled, then the selection and purchase of mining equipment must be started. In the establishment of the whole mine, the most important thing is the selection and purchase of processing equipment. Gravel field can supply road to build high quality aggregate. In order to provide investors with high-quality sand and stone equipment, our company has increased investment in scientific research. At present, the sand and stone production line has the advantages of energy-saving, environmental protection, high efficiency and stability. The aggregate produced has good granularity, especially to meet the requirements of high-quality buildings for stone granularity. After more than 20 years of technology and production experience, Vanguard Machinery has the most advanced experience in gravel field production, which can provide customers with advanced machine-made sand production line equipment, artificial sand aggregate production line technology and configuration scheme, and has higher economic value, creating greater profits for investors.
The sand aggregate production line with an annual output of 10 million tons is composed of the following equipment: PE1200×1500 jaw crusher, PF1315 impact crusher, VSI1145 new sand making machine and belt conveyor, vibrating feeder, circular vibrating screen and so on. The advantages of adopting Vanguard Machinery sand aggregate production line are obvious. First, the quality of sand aggregate products is superior. The sand and stone products produced by the company conform to the requirements of product mixing principle, particle cleanliness (high cleanliness can enhance the performance of concrete), particle size, and other national standards such as "sand for construction" and "pebble and gravel for construction". The price of the products is higher than that of other competitors. Second, the operation cost of the later period is low. The main equipment of this production line adopts advanced wear-resistant material technology to produce ultra-high wear-resistant parts, which makes the spare parts used in the sand and stone production line have a long life and greatly reduces the maintenance cost in the later period. In addition, Zhengzhou Vanguard Machinery Sand and Stone Project Department provides the following complete sets of equipment and general contracting services for the users of the sandstone field: 1. a package of contracting services for the project of the sandstone and aggregate production line (design, civil engineering, installation); 2. a complete set of equipment and spare parts for the project of the sandstone and aggregate production line; 3. after-sales service for the project of the sandstone and aggregate production line.
The continuous development of the electric power industry has brought about a series of environmental problems, especially the atmospheric pollution of coal-fired power plants. The sulfur dioxide and scoot from coal-fired power plants are the main sources of air pollution in China. The treatment of the discharged wastes is an effective way to reduce environmental pollution. The post combustion desulfurization technology refers to the technology of removing sulfur dioxide from the flue gas discharged from the combustion device. According to China's national conditions, flue gas desulfurization should be the main way to control sulfur dioxide emissions in thermal power plants, and should be vigorously promoted. Limestone desulfurization is the main raw material for desulfurization in power plants. Limestone can be made into desulfurizer after being processed into powder by grinding machine. Vanguard Machinery produces a series of grinders based on the same equipment products at home and abroad are updated and improved design, especially suitable for limestone powder processing and production, its high efficiency, low power consumption, small footprint, small one-time investment.
At present, there are more than 300 kinds of stone materials, such as calcite, cobblestone, limestone, bentonite, coal gangue, granite and so on. These materials are already existing in the nature in large granular form. These large stone materials can be processed into powder and used in various industries. But what kind of equipment is used to powder the stones? The original ore grinding equipment was Raymond mill. After continuous improvement and technological research and development, high-pressure medium-speed mill, hyper pressure V type grinder and European type grinder were put on the market. There were also three-ring medium-speed grinder, high-pressure micro-powder grinder and ultra-fine powder mill for ultra-fine powder processing, as well as coarse powder processing. The straight centrifugal grinder can process the ore to 30-2500 mesh and meet the different needs of users.
Petroleum coke is a kind of coke produced by distillation of crude oil and thermal cracking of heavy oil, and delayed coking of residue oil. Most of the petroleum coke produced in China belongs to low sulfur coke, mainly used for smelting aluminum and making graphite. It can also be used as fuel, but it needs petroleum coke ultra-fine grinding equipment for ultra-fine grinding to make coke powder before it can be burned. At present, some glass factories and coal water slurry factories mainly use coke powder as fuel. For various uses of petroleum coke, Vanguard Machinery has introduced petroleum coke production line for petroleum coke processing, which mainly consists of jaw crusher, petroleum coke grinding equipment, classifier, cyclone collector, pulse bag filter and corresponding motor, electronic control, feeder, collector and unloading device.
Specific process: the crushing of petroleum coke powder in the preliminary stage-jaw crusher (if the feed size is less than 3 cm) processing to the fineness of less than 3-5 cm to meet the needs of ultra-fine grinding. The feeding equipment is composed of a fully sealed vibrating feeder. The feeding is connected with the elevator or belt conveyor and totally closed to the hopper. Then it is ground, which consisting of Raymond mill or ultra-fine grinding. Then the quasi-qualified powder which has been crushed will be graded. Meanwhile, the qualified powder will be collected by cyclone collector, and the unqualified powder will be returned to the grinding equipment for further grinding until all the required particle size is reached. The required powdered particles will be collected for dust cleaner. The petroleum coke powder is easy to run off the dust, and bag dust catcher can block 1 micron of ultra-fine powder to ensure environmental cleanliness. The unloading material adopts large hopper with high sealing bin, and finally discharges other impurities. The whole production line can run for a long term. The finished product of petroleum coke powder has uniform fineness and high quality. The whole set of petroleum coke production line is operated under negative pressure with the large air flow rate, and its operating temperature is about 55 degrees. Whole production site is free of dust pollution, and the system discharge meets the national environmental protection requirements.
Quartz sand production line mainly refers to: quartz stone through crushing, sand making, screening and a series of processing after the production of quartz sand production line process equipment. The quartz sand production line is composed of vibrating feeder, jaw crusher, impact crusher, sand making machine, vibrating screen and belt conveyor. According to different technological requirements, various types of equipment are combined to meet the different technological requirements of customers.
Technological process: quartz is evenly sent to jaw crusher by vibrating feeder for coarse crushing, the coarse crushing material is sent to sand making machine by belt conveyor for further crushing, the fine crushed material is transported to vibrating screen for screening, then the material which meets the requirement of particle size is sent to sand washing machine for cleaning. After cleaning, the material is transported and the output by belt feeder is the finished product. The material which does not meet the granularity requirement is returned from the vibrating screen to the sand-making machine for reprocessing, forming a closed-circuit multiple cycles. Granularity can be combined and graded according to users' needs. If dry process is selected, coarse and fine powder separator and dust removal equipment can be provided. Vanguard Machinery provide users free pre-sale, in-sales and after-sales services, according to customer production site to design the program, strive to achieve the most reasonable and economical production line for customers.
There are many raw materials that can be used to produce machine-made sand, such as mountain stone, limestone, quartz, river pebble, cobblestone, granite, weathered fossil, bluestone, etc. It is not said that high-hardness ores can be crushed as raw materials of machine-made sand, but we should choose the best kind of ores according to the situation of use. if it is in road build, we need to use pebbles to make sand, it become a good helper in road construction for its characteristics of good hardness, bonding effect and wear-resistant. If the machine-made sand is needed for building, we can choose the lapis. Although the hardness of lapis is not very high, it has very important toughness so that the building can withstand different wind and earthquake forces.
The crushing operation of open-pit mining with mobile crushing system has been widely used in abroad developed mining areas. It has been widely recognized with characteristics of flexibility, high efficiency, short construction cycle and reusability. In recent years, with the continuous expansion of the scale of mine construction and the gradual improvement of national mining laws and regulations, the use of mobile crushing plant is also growing rapidly. It has been more and more recognized by enterprises for the characteristics of energy-saving and environmental protection.
Taking open pit mine as an example, the replacement and supplement of mobile crushing and screening equipment relative to fixed equipment is not only has an improvement of efficiency, but also embody production concept of energy saving and emission reduction. With the development of open pit mining, mobile crushing and screening equipment has become the inevitable choice of international mining giants. And more comprehensive performance, so that mobile crushing and screening equipment of Vanguard Machinery has high applicability, rapid and efficient operation in different working area. This is also true for road construction and other working environments. It can be predicted that in the field of crushing system of large-scale open pit metal mines, automatic portable crushing system will be the development direction of millions of tons of mining industry. It has a good application prospect, which can bring good economic and social benefits for the future development of mines.