You are here:Home > Product > Grinding Mill > HGM Three-ring Grinding Mill
Note: specific production capacity is based on customer site configuration and production capacity.
Non inflammable and explosive brittle materials with Mohs hardness less than 6 grade.
Applicable MaterialLimestone, calcite, fly ash, calcium carbide desulfurization, kaolin, calcium carbonate, coal gangue, gypsum, slag powder, slag powder, coal powder, bentonite, barite, marble, talc, refractories,etc.
HGM series three-ring (four-ring) micro grinder is a new type of ultra-fine powder processing equipment, which is based on many years of mill production experience, absorbing Swedish advanced mechanical technology manufacturing technology, after more than 20 tests and improvements. It is the latest product leading the world trend of grinder. HGM series three-ring (four-ring) medium-speed mill is mainly suitable for processing non-flammable and non-explosive brittle materials with Mohrenheit hardness less than 7, such as calcite, limestone, dolomite, kaolinite, bentonite, mica, illite, pyrophyllite, barite, sepiolite, fluorite, potassium ore and so on.
Service life could be 1 year and is longer than wear-out part’s of impact crusher and turbine crusher if material and product size are same.
Under the condition of same material, power and final product size, its capacity is higher than jet mill and stirred mill by 40%.
No antifriction bearing and bolt inside the grinding cavity, no bearing or sealing element or bolt falling out and damaging machinery situation.
No antifriction bearing and bolt inside the grinding cavity, no bearing or sealing element or bolt falling out and damaging machinery situation.
When working, the material is continuously fed into the crushing chamber of the main engine by the feeder, thrown into the gap between the grinding roll and the grinding ring by the disc, and subjected to the impact, rolling and grinding of the grinding roll and the grinding ring. Under the action of the negative pressure and the wind wheel, the crushed material is brought into the upper part of the analyzer chamber by the high-speed air flow from the tuyere. Through the high-speed rotating analysis wheel for fine classification, qualified finished products powder through the analysis machine outlet directly into the back of the large pulse dust collector collection, crude powder is back to the crushing chamber re-crushing, clean gas through the dust collector by high-pressure induced draft fan, the whole system is in a negative pressure state of operation and production, no dust emissions.
Model | HGM80 | HGM100 | HGM125 | HGM168 | |
No.of Roller and Ring | No.of Roller | 21 | 36 | 40-44 | 30-40 |
No.of Ring | 3 | 4 | 4 | 4 | |
The Feeding Size(mm) | ≤20 | ||||
Capacity(Kg/h) | 500-5000 | 1000-8500 | 1500-12000 | 5000-25000 | |
The Final Size | Micron | 3-45 | |||
Mesh | 325-3250 | ||||
Motor Power (KW) | Main Mill | 55 | 110 | 160 | 315 |
Classifier | 18.5 | 37 | 45 | 18.5×5 | |
Air Blower | 45 | 75 | 2×55 | 90×2 | |
Screw Conveyer | 3 | 3 | 2-4 | 2 | |
Discharge Valve | 2×0.75 | 2×0.75×1.1 | 4×1.1 | 1.5×20.75×2 | |
Air Compressor | 7.5 | 15 | 2×15 | 55 | |
Overall Dimension (Length*Width*Height)(M) | 13.9×4×6.2 | 18×4.6×8.6 | 14×9×10.25 | 26.3×7.5×11.9 |
Thank you for your interest in Vanguard Machinery. If you want to know more about our crushers and industrial grinding equipment.
Contact us now to find out what we can do for you!
Email:info@vanguardtec.com
Fax:+86-371-8658 2102
Tel:+86-371-5557 8880
Please feel free to give your inquiry in the form.